Change-Id: Ied682884abdba27da265f1ce3632417f54a80fe2
Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>
Reviewed-on: http://openocd.zylin.com/2380


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Reword info about creating SSH key - it's not required to add it to
Github account. Mention adding created SSH key to Gerrit account -
without this step it's not possible to access Gerrit in further
steps.

Change-Id: Ibd81521fbe47d4b4beae0b77cdc9d939fd3ee20c
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/1350


Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>

Add url to show where the http password is configured.
Also add note that password can also be saved to url git config.

Change-Id: I3c1a022580e5f73372b0c50e8d1d2f0b1498966f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1207
Tested-by: jenkins

Rather than use bold fonts etc, use the correct keywords so doxygen formats
better.

Change-Id: Id9d63f0fc3465665376d7a536c4d6da71998f40e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1210


Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Inform about possibility of discarding negative review in Gerrit when specific conditions are met.

Change-Id: I432b6c93cefc368fa22ce1096bea4cd174e03816
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/747


Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>

Change-Id: Iea1f3b665b011ca3748800048039d3f6b33d7756
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1101


Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Tomasz CEDRO <cederom@tlen.pl>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: Spencer Oliver <spen@spen-soft.co.uk>

The new sourceforge platform also supports http access, so use that rather
then repo.or.cz.

Change-Id: Ica89d9475847a2095c179b240053145795549802
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/982
Tested-by: jenkins

Gitweb changed their instructions, info about ssh keys is now on
separate page for all platforms (selector at top of the page).

Change-Id: I3eab5dfae06cfb73f4a76718f92518454021e557
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/768


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

since gerrit 2.3 pushing changes to refs/for/ is deprecated in
favour of using refs/publish/.

Change-Id: I6244b9645da2144921583bd9778a95c563fac89f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/567
Tested-by: jenkins

When following the Patch Guidelines step by step,
an error occurs at step 6.

"git pull --rebase origin/master" results in the error:

fatal: 'origin/master' does not appear to be a git repository

Removing the / seems to fix this.

Change-Id: I4e2fa23c60654abeaebd3b25a8c8375aa07b0abd
Signed-off-by: Bill Traynor <wmat@alphatroop.com>
Signed-off-by: Peter Stuge <peter@stuge.se>
Reviewed-on: http://openocd.zylin.com/574


Reviewed-by: David Anders <danders.dev@gmail.com>
Tested-by: jenkins

Change-Id: I020845a8df7b67f3b6c1a233b3ee07a5d14fa685
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/556
Tested-by: jenkins

Change-Id: If39b522594a4ee3758fb85309af01f7a98c9f939
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/553
Tested-by: jenkins

Small script to setup Gerrit with the local repository

Usage: tools/initial.sh <username>

Change-Id: I26527c35cfe040c7752efec06064d5dc9e3ec6a2
Signed-off-by: Ulf Samuelsson <ulf@emagii.com>
Signed-off-by: Attila Kinali <attila@kinali.ch>
Reviewed-on: http://openocd.zylin.com/290


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Change-Id: I3e50357b4ddaf483712bbac68b6427b31529f666
Signed-off-by: Timo Ketola <timo@exertus.fi>
Reviewed-on: http://openocd.zylin.com/387


Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Change-Id: I281e9145f43bc7ac173e02c4e209834f0deaae2b
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/254


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Change-Id: I4c3cde2aae7bdea138413e373ac986be3efd54de
Signed-off-by: rodrigo_l_rosa <rodrigorosa.lg@gmail.com>
Reviewed-on: http://openocd.zylin.com/252


Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>

Change-Id: I191c1da5126c4c9ea1ff8826576b6b24feaf9881
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Reviewed-on: http://openocd.zylin.com/157


Tested-by: jenkins
Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

1) Add a couple more steps when setting up the Gerrit account.

Change-Id: I5d81feac4650d4d28653d14cfc0baf14270424c1
Signed-off-by: Jim Norris <u17263@att.net>
Reviewed-on: http://openocd.zylin.com/28


Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: Peter Stuge <peter@stuge.se>

Change-Id: If79e86c731ac06aaefca1aebde40e7cb3de68e4d
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>