In function pic32mx_write_block() if the parameter
offset is not a multiple of row size the row offset
(offset % row_size) will be ignored by the flash
controller, shifting the code to the beginning of
the row.
Word programming gets it right.

Change-Id: I134913e3d533688f791bbcb0c6e8983524197f3c
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/796


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

So the user can view the current port number these cmds were changed to COMMAND_ANY.
However this means that the user can also attempt to change the port number after init,
even though this is not supported. Issue a warning that this is not supported.

Change-Id: I3d20dcd81277e7d994240a8e314f27672ff760c4
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/788


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Change-Id: I5fe7b695b00faef966e7621614bbd60b6e694a4f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/800


Tested-by: jenkins
Reviewed-by: Mathias Küster <kesmtp@freenet.de>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Treat SWD wait result as success, otherwise hardware reset will sometimes fail.

Change-Id: I0dbdbe9e75924fe0dde547a72883c60c3db7b15e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/799


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

The last bit of a scan is clocked during TAP movement so it's necessary
for the last field to have at least one bit. Strip trailing empty fields
and make sure the TAP is not affected if there's nothing to scan. Clients
probably shouldn't add empty fields so add a debug message to be able to
track and fix them.

Change-Id: I27552568bc11146570b9b99ed8a1ae81b5fb2c50
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/794


Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

When there's no data to scan in or out, we still use the clock data out
command and fill the buffer with zeroes, so make sure the buffer is
checked for available space.

Change-Id: Ia6005c40c81f7fdb89379f1b5023fe383184d210
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/793


Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Change-Id: I8e68b9d6f571ef7715a2f4cad0aa78fe4e3b48e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/798


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Currently only the adapter speed is printed, which can be rather misleading
when DEBUG_INFO is disabled, all the user sees is
6000 kHz
instead lets print
adapter speed: 6000 kHz

Change-Id: I8f02a63f47344457e3c3d0a6774157fa18206440
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/797


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Added some missing items to NEWS file prior to final 0.6.0 release.

Change-Id: I69255c85fa8f4b6f06eae7c56f78072e3ec2d6f8
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/784


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

DISTORTEC's JTAG-lock-pick Tiny 2 is a new interface using FT232HL chip
and layout similar to KT-LINK.

Change-Id: I2831b169cd448ca70397f2dd86c5b749dda3dabf
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/787


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Add single "scripts" folder to search path for Windows OpenOCD builds
that don't use cygwin
bin/openocd.exe
scripts/interface/dummy.cfg
scripts/target/at91eb40a.cfg

Do some refactoring of current code (thx to Andreas).

Change-Id: Idbb08d1368b06f25da44f4f9ab1511db992b1724
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/785
Tested-by: jenkins

Offset calculation into buffer was wrong and code would read outside buffer
if count was not a multiple of four.

Change-Id: Ied625b10221423d5a5f25d27ce1edd8c2c3eca8a
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/749


Reviewed-by: Peter Stuge <peter@stuge.se>
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

The number if longwords or "sections" (Freescale term) written for a Kinetis
flash write (4, 8, or 16 bytes depending on the part density/granularity) are
now rounded up to ensure there are no truncations when the desired write is
not a multiple of the minimum write size.

Change-Id: I8db40a8769d8ac5393a46cbf4e5ff0df82faf916
Signed-off-by: Christopher Kilgour <techie@whiterocker.com>
Reviewed-on: http://openocd.zylin.com/738


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Memory leaks discovered by clang 3.1

Change-Id: I8a784ba9726deac508424eddb27e9c8409e2773f
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/795


Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

For example in a pic32mx220, pic32mx unlock don't work
if adapter_khz is set to 5000 or more.

A short delay after asserting reset fix the problem.

Change-Id: I62e493edfcea585c36c8de77a969cebac7227b96
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/790


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

If the target supports SYSRESETREQ make sure we use that as the default
if srst is not fitted/configured.

Change-Id: I24c907493134506320e69c1218702930629c1cdc
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/792


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Change-Id: I782da74687bcf111c1f04c53b2c1120d6a034441
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/791


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Always scan out all bits, but make sure only the allowed number of bytes
end up in the caller-provided buffer. Discard the rest by adding another
scan field when size < 4.

Rewrite the endianness callback to avoid reading outside allocated memory.
Make it directly usable as a callback without the need for a wrapper. Move
the shared callback to a more suitable home in arm7_9_common.

This fixes the regressions introduced in commits
991ed5a2
cb90d32e
and
c3074f37

Change-Id: Ia8bde8c5a9844e89a1d6c0bc8534cd26f02f8d11
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/789


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

The function  wait_for_pracc_rw() fails if Pracc bit is 0.
The variable ejtag_ctrl is loaded with the content of the
control register in the first scan.
In the second scan Pracc bit is scanned out as 0, letting
the proccesor go. The result is unpredictable.

All the strange data corruption when scanning at certain
frequencies, or the strange delays needed when entering
or leaving fasdata area are retated to this bug.

Now the code works at any scan frequency, tested up to 15000Khz
and indepently of processor speed, tested at 31.25Khz and 4/8Mhz.

Change-Id: Iedfd81d06d6af4bc738a521f720e42323025b268
Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Reviewed-on: http://openocd.zylin.com/769


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

working_area::user has never been used so lets remove it.

Change-Id: I1200311b34248549c1fe30c9f675e6129b7bebee
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/781


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Retest the condition when needed, instead of abusing the common_magic
field as a flag. There are only two options here. Either it's an armv7m or
it's another arm. is_arm(...) will return true even for armv7m, so it's
imperative to check in the right order.

Change-Id: Ic227f19f7babf1b0b0fe075f9a3abc4eabc7d5f1
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/779


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Change-Id: I3c6a63a18034535f0a8c2c62ba8a708f09d7839b
Signed-off-by: Martin Nowak <dawg@dawgfoto.de>
Reviewed-on: http://openocd.zylin.com/765


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Issue found by clang-3.1

Change-Id: I2e922ec83117e75db5bec1e82edaa75a9e6e7464
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/778


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

By Initialising the param_table we remove the clang warning's.
We are also make sure we are not passing any rogue values to lpc2000_iap_call.

Change-Id: Idb3b0077d1dae5f03dedab1d46d01140fe9ffb10
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/777


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Reorder to allocate all memory after COMMAND_PARSE_NUMBER call.
This removes a clang warning about un-released memory

Change-Id: I8dbeb664a6467077157015bd879bc0aefc5e8614
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/776


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Fix the memory leaks found by clang-3.1

Change-Id: Iaae68627ef599c324c9c9ee5737c22e92512862d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/775


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

If the flash class was defined as FC_FLEX_RAM then this would always drop
through to the default handler.

This bug was found by clang, so untested.

Change-Id: I2d9fe6415dd216728a145519400f7b9ef1bd3c3a
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/773


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-by: Mathias Küster <kesmtp@freenet.de>

Change-Id: I66643960e38625e843b5f54d1c072e4eee78284d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/772


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Flashing a CFI flash and debugging with gdb work fine.

Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7
Signed-off-by: Aurelien Jacobs <aurel@gnuage.org>
Reviewed-on: http://openocd.zylin.com/770


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Nothing checks it against 0, so it hasn't caused any problems.

Change-Id: I5e349299c37fb72bab811d78992f6de3731a986a
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/774


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

This file is already included as olimex-arm-usb-ocd.cfg.

Change-Id: I0e66977c58e74ac93a0dc3a0c88a5e5af4992f8b
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/780


Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

The embedded projects shop released a new highspeed version of
the openocd-usb adapter. These configuration files adds support
for it.

Change-Id: I9b23d7889f998712b9041af101e3f0b9aba85b28
Signed-off-by: Andrew Karpow <notandyk@gmail.com>
Reviewed-on: http://openocd.zylin.com/771


Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>

Change-Id: Ibb7669ea73872d75a5c2f32f2264e57b1d0f20c7
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>

Change-Id: Idd85159050a39c2136ee8a31f939a2b3e35cff1b
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>

Check that the target is valid before calling any target functions.

Change-Id: I538fccc79d5ec89976e14beab02cb20490b299bb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/766


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Gitweb changed their instructions, info about ssh keys is now on
separate page for all platforms (selector at top of the page).

Change-Id: I3eab5dfae06cfb73f4a76718f92518454021e557
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/768


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

make distcheck is used to make packages with OpenOCD release, this
command uses information from Makefile.am files to know which files
should be included in the package and which can be left only in
repository. This patch makes a few headers from recent JTAG drivers
and one txt file with info about target tcl config files included in
released packages.

Change-Id: I91202290633a30f53624a8c7d9a0ebf72c40772b
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/767


Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Provide cache operations coherent with internal target state.
Functions similar to xscale target.

Change-Id: Ic6b9a894154f6e4f5672b5d7f5035c9774ee9499
Signed-off-by: Alexander Osipenko <sipych@gmail.com>
Reviewed-on: http://openocd.zylin.com/695


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Not just print it.

This enables scripts to analyze valuable config options of
arm946e-s cores, do internal BIST memory tests and more.

Be careful to flush caches before disabling it.
Do not forget that BIST test overwrites  memory.

 - cp15 rewritten from COMMAND_HANDLER to jim_handler.

Change-Id: I734da0be6db0a3127c2daa94ed75efef94da8ceb
Signed-off-by: Alexander Osipenko <sipych@gmail.com>
Reviewed-on: http://openocd.zylin.com/694


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

Cache type register C0.C is read-only, and display
hard core configuration information.
This information is unlikely be changed in runtime.

 - removed C0.C access when result is not used in
   arm946e_invalidate_dcache()
 - access C0.C only once per target, store result
   in cp15_cache_info field of target structure
 - fix cache index count calculation

Change-Id: I12bc4c967fdf07f54d755f2f2f42406c0ababc1a
Signed-off-by: Alexander Osipenko <sipych@gmail.com>
Reviewed-on: http://openocd.zylin.com/693


Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>